Saturday 27th April - Day trip to Derby!

 Good friend of mine Dave Maton rang me Thursday night and said that he had a chance of buying a 1298cc engine for his Morris Minor from Derby, so did I fancy going up with him and collect my engine at the same time and thus share the fuel costs? (My newly built engine was ready for collection at HarveyTune in Derby, so it made sense to collect the pair at the same time.) So, a plan came together and we opted to take my Peugeot 308 estate as opposed to Dave's Land Rover Discovery as it would be cheaper on fuel, but also because if we used Dave's Discovery we would have to transfer my engine from his car to mine when we got back to his place and he hasn't got an engine crane. 

I set my alarm for 06.30 Saturday morning, but I was awake at 05.50, so left for Dave's at 06.15 and text him to tell him to get his arse ready! We had a trouble free run up and was up at the first collection point at 09.10. Luckily the guy we were collecting Dave's engine from was up already, so we collected it and then tried to find a cafe so we could have some breakfast. Unfortunately, cafe's seem to be few and far between on the outskirts of Derby, so we had to settle for a Greggs on a retail park. We had a bit of time to kill until Dave Harvey would be around to collect the second engine, so a Bacon and Sausage baguette and a large coffee were the order of the day. (Dave had a large hot chocolate- he doesn't do grown up drinks like tea and coffee)  

Suitably refreshed, we arrived at HarveyTune and Dave Harvey arrived around 10 minutes later. While we were waiting, Dave Maton and I had the chance to sort out the petrol costs and who owes who what etc from the Round Britain Reliability Run last October! Because we had broken down before the finish, we hadn't had a chance at the end of the event and although I've seen Dave since then, today was the first time we'd remembered to sort it out! 

With my engine loaded and strapped down I sat down for a lovely cup of coffee and a good chat with Dave Harvey and made arrangements for him coming to my house in a few weekends time. I'll get the engine fitted in the mean time and he can come down for the first start up. (Only fair seeing as he built it)

We made tracks after our cuppa and other than a 30 minute delay at Northampton for an idiot driver that had managed to land his car on its roof on a completely straight road, (the M1) we had a another trouble free run back to Dave's. We quickly unloaded his engine and then I got away sharpish. I wanted to get my engine unloaded as well when I got home, but that would mean moving two Cortina's off the drive and out of the way to do it. I had a free run home as well and within 30 minutes of arriving home, I had the engine safely in the garage and the two Cortina's back in place and covered up again. 

Before I got home though, I had filled the Peugeot back up with diesel as I wanted to see how much fuel we had used. The gauge was still reading half, and after re-filling it I found that our total cost to go from mine (Leigh on Sea) to Dave's at Cheshunt, Hertfordshire, to two collection points in Derby, back to Cheshunt, and then back to mine was £34.70. I had set my speed limiter for 70mph on the motorways and had been rewarded with 66.12 miles per gallon! Fantastic mpg for a fairly big car, especially with the weight of two engines in the back for half the journey. Ever wondered the real reason the government doesn't want us driving diesel cars????

Thursday 25th April - Bumper improvement programme!

I received a phone call today saying that my Cortina bumper was ready for collection....again! It had had some chrome treatment a little while ago, but unfortunately for some reason it had reacted and started to peel. 

 So, it was sent back to the guy who did it for me and he resolved to make it right. It looked good when I collected it, so it was quickly fitted to my Cortina before the rain came down. Hopefully, it will last this time. 

With this done, I turned my attention to the front bumper on my Triumph. Since looking at Richards Mk1 Triumph on the HCR I decided that the Mk1's look a lot better at the front with the overriders removed from the bumper. The headlights, front grille and bumper all sit horizontally, so the vertical overriders don't quite sync.

I removed the overriders from my bumper, but it left tell tale marks where they had been and I wasn't happy with that. 

So, I found another bumper in my stores shed that wasn't perfect, but was a lot better than the existing one. After a bit of spannering and polishing, I had the replacement bumper fitted. I think it improves the look no end, so it will stay like this for the time being. 

Tuesday 23rd April - Engine removal complete!

 I had some assistance in the form of Gavin this morning, so I had a saved some of the jobs that were easier with two men until now. 

The first job was to remove the bonnet and lay it on the roof of the car. Next on the agenda was to remove the cylinder head. (I can do this on my own, but it's bloody heavy!) We then removed the starter motor and slave cylinder, the last few remaining bellhousing bolts and the engine was then ready to come out. 

After setting the engine crane up, I supported the gearbox with a trolly jack and then got to lifting the engine. It came out quite easily to be honest. With the engine out of the car, I then removed the crankshaft pulley, clutch, flywheel and rear engine plate. 

The last job was to drain all of the oil from it and then move it to the side of the garage. I left the engine crane set up as I'm going up to HarveyTune on Saturday to collect my new engine, so I'll need the crane to unload it from my car. With everything done, we cleaned up and went out for ham, egg and chips at Addy's cafe. very nice it was too. Another successful day!

Monday 22nd April - Engine removal started!

 I had a few things to do on Monday morning and never got home until 2.15pm, so I started quite late on the engine removal process. However, with the warm weather and the company of greatest hits radio, I got stuck in and just cracked on. 

First thing was to drain all the water out of the radiator and while this was draining I undid and removed all heater hoses and fuel hoses. I then moved on the nearside of the engine and removed the distributor and alternator before moving across the front of the engine and removing the water pump. I then removed the air filter, twin carburettors and inlet manifold. 

My next task was remove my additional brake vacuum tank (Especially good for providing better braking efficiency on the long mountain passes in Europe) and my expansion bottle, so that I could get access to the radiator bolts and remove the radiator.

I then undid the bellhousing bolts around the top half of the engine and removed the rocker gear and push rods and undid all the cylinder head bolts in readiness for the head to be removed in the morning. (Gavin was coming round to provide a bit of assistance)

By the time I had cleaned the tools and put them away, it was close on 6pm, so I decided to call it a day and go indoors for some much earned tea. Quite a successful afternoon! 

Sunday 21st April - I finally get around to moving cars about.

After being badly ill since Tuesday I had finally managed to persuade my Doctor to prescribe me some Antibiotics so I could get better. (I had to do it by phone, trying to get a face to face appointment is an absolute joke these days!)  Anyway, today I finally felt well enough to venture outside and move some cars around. 

I had to move the Triumph into the garage in readiness for its engine removal and dissection which meant moving both Cortina's out onto the driveway for a while. 

I then reversed the Triumph into the garage and found that my carbon monoxide alarm works just fine when it started bleeping like a lunatic! I left both doors open for the next 30 minutes to make sure all the fumes had cleared. 

So, today mission was a success and the engine removal will start shortly. 

Wednesday 17th April - The Cortina Starter Motor saga continues

 Unexpectedly, the starter motor that I had sent away to be modified, (That should have taken a week) suddenly arrived back with me on Tuesday 16th April. I quickly fitted it only to find that this time it was just clicking and doing nothing else. I rang the supplier again and after a lengthy discussion we decided to try a different model number. With his usual fantastic service this replacement model arrived Wednesday afternoon. 

Unfortunately, I'd become quite ill on Tuesday afternoon and I was starting to feel quite poorly this afternoon as well. (I think it was a reaction from a hospital procedure I'd had on Monday afternoon) Luckily, I have a fantastic mate, Andy, who's a mad petrol head and very much into classic cars as well. He called round after work for a catch up, and then insisted on fitting the starter motor for me! What a great guy he is! 

Unfortunately, the new model was significantly bigger and just wouldn't fit properly. Well it would, but you then couldn't get the top bolts in to hold it in place securely. Sadly, poor Andy then not only had to remove it, but also had to fit the original inertia one for me so that the car was kept mobile. (I just stood there shivering and freezing cold and holding the torch for him) 

With this done, we retired to my nice warm house and ordered a Chinese takeaway. (Which I hardly ate any of because I was feeling so rough!) As soon as Andy left, I promptly went to bed and slept for about 14 hours and most of the following two days as well!!!

Monday 15th April - More engine pics from Harveytune Derby.

 After the clamp on Dave Harvey's dial gauge broke after timing the camshaft, he wanted to make sure he was double sure it was right before sealing it off. So it was nice to receive pics today showing that the Camshaft timing was complete and double checked and he'd bought himself a new DTI gauge as well. 

All it needs now is the oil pump, sump pan and timing chain cover fitting and then it's complete and finished. I need to start getting on with moving the Triumph into the garage now and start getting the existing engine removed before this one suddenly turns up on the doorstep! 😕