I finished work on time again today, so it was time to get a few more garage hours in, especially as I'm busy for the rest of the week and this would be the only chance this week.
I had to finish off fitting the steering column shroud and parcel shelf that had been extracted when I removed the steering box, but once this was done I turned my attention to the engine. I fitted the engine mounts as they had been removed by the engine builder and also re-fitted the clutch, making sure the bolts were tightened to the correct torque setting.
The engine didn't want to go back in first of all, but with a bit of jiggery pokery it was soon in place. However, while the bell housing bolts lined up fine, the engine mounts didn't want to line up with the crossmember. After a bit of head scratching and thwarted efforts, I decided to remove the engine mounts from the block and swap them over. I mean, they looked exactly the same shape, so I didn't think they were handed, but I reckon they must be as things then became a lot easier and I was able to get the securing bolts in.
As it was now 7.15pm, I called halt and went indoors for some dinner. I'm not sure when I will get a chance to get this finished off now as the rest of my week and the coming bank holiday weekend is looking quite busy, but any progress is still progress, so I was pleased with what I'd got done. To be continued! 😊
No comments:
Post a Comment